Optional Modules; Table Top; Portal - RK Rose+Krieger RK Easywork Betriebsanleitung

3.3 Optional modules

3.3.1 Table top

Fig. 5: Table top

3.3.2 Portal

29.05.2019
The table top (Fig. 5/1) is used as the work surface in the assembly
workstation.
The following table tops are used for different applications:
n Laminated particleboard (melamine, HPL)
n Oiled multiplex board (beech)
n ESD table top (HPL)
Further information:
n Ä Technical instructions for Easywork, chapter "Table top"
Fig. 6: Portal
A with boom
B without boom
The portal (Fig. 6) is fitted to the rear of the frame (Fig. 4/1,
79) and is used to mount an LED lamp, a monitor mounting, aids
and tools, for example.
Further information:
Ä Technical instructions for Easywork, chapter "Portal"
n
Assembly workstation RK Easywork
Set-up and function
Optional modules > Portal
Ä page
81