Inhaltsverzeichnis
Werbung
Switching on
the appliance
Switch on the appliance with the main
switch. Fig. 1/5
The temperature display flashes, Fig. 2/4,
until the appliance has reached the set
temperature.
Interior light in refrigerator compartment
is switched on when the door is open.
Operating tips
While the refrigerating unit is running,
beads of water or hoarfrost form at
the back of the refrigerator compartment.
This is quite normal. It is not necessary to
scrape off the frost or wipe off the beads
of water. The rear panel defrosts
automatically. The condensation flows
into the evaporation area of the appliance
via the condensation channels and
the drainage hole.
Selecting
the temperature
Fig. 2
Refrigeratorcompartment
(can be selected from +2 °C to +8 °C)
Keep pressing temperature selection
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated
on display 4.
We recommend a setting of +4 °C.
Perishable food should not be stored
warmer than +4 °C.
Cool fresh compartment
The temperature in the cool fresh"
compartment, Fig 1/B, has been set to
almost 0 °C at the factory and should not
be changed if at all possible. If frost forms
on the refrigerated food, the temperature
can be increased. (See Eliminating minor
faults yourself".)
en
23
Werbung
Inhaltsverzeichnis
