Herunterladen Inhalt Inhalt Diese Seite drucken

Dibo JMB-M Originalbetriebsanleitung Seite 116

Vorschau ausblenden Andere Handbücher für JMB-M:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

E N
    o p E R aT I o n
26 S A F E T Y T H E R M O S TAT C H I M N E Y
If the temperature on the temperature probe exceeds the setpoint value.
The chimney thermostat will now arrange that the fuel valve and the burner
motor will be interrupted directly. The chimney thermostat can only be reset by
means of pushing the green reset button on the thermostat (first unscrew the
black protection) in the burner electric box.
27 T R AC K & T R AC E ( O P T I O N )
The trailer can be equipped with a tracker. The necessary information/data can
be achieved via a login on the tracker website. also use/reed the delivered
manual of the tracker (1.780.510).
 
Pay attention: when you want to use the Track & Trace, first
reconnect the tracker to the battery of the trailer. This can happen
by inserting the delivered fuse of 1A in the fuse holder "F14" (in
the burner electric box) whereby the tracker will charge.
When the tracker has power supply, the tracker will attempt to connect to GpS
satellites, which will update the date and time and the device will receive the
correct settings again after which it will send all the logged data to the platform.
The SIM card must have a connection with a mobile phone network to send all
relevant data.
28 P R O F E S S I O N A L S W I TC H M O D E B AT T E RY C H A R G E R ( O P T I O N )
The trailer with track & trace will be standard equipped with a charging cable
(1.701.075) to connect any professional switch mode battery charger (1.701.210)
on the battery.
 
Pay attention: the battery may not be charged constantly!
The trailer (machine) may not be switched on at any
circumstances during the charging procedure!
For info: If the battery clamps are incorrectly connected, the reverse polarity
protection will ensure that the battery and charger are not damaged.
Estimated time for charging (for an empty battery): +- 20h. The charger is
designed for charging only for batteries according to the technical specification.
See also the delivered manual of the professional switch mode battery charger.
DiBO 22

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis