Key to symbols and safety instructions
1
Key to symbols and safety instructions
1.1
Key to symbols
Warnings
Warnings in the text are indicated by a warning triangle.
In addition, signal words are used to indicate the type
and seriousness of the ensuing risk if measures for
minimising the danger are not taken.
The following keywords are defined and can be used in this document:
• NOTICE indicates that material damage may occur.
• CAUTION indicates that minor to medium personal injury may occur.
• WARNING indicates that serious or life-threatening personal injury
may occur.
• DANGER indicates that severe to life-threatening personal injury will
occur.
Important information
This symbol indicates important information where
there is no risk to people or property.
Additional symbols
Symbol
Explanation
▶
Step in an action sequence
Cross-reference to another part of the document
•
List entry
–
List entry (second level)
Table 1
1.2
Safety instructions
General
These installation and maintenance instructions are intended for
contractors.
Failure to observe the safety instructions can result in serious injuries.
▶ Read and follow the safety instructions.
▶ Install and commission products and their accessories in accordance
with the installation instructions provided.
Intended use
This heat pump must only be used as a heat appliance in a sealed hot
water heating system for domestic purposes.
Any other use is considered inappropriate. Any damage that results from
such use is excluded from liability.
Installation, commissioning and servicing
Installation, commissioning and servicing must only be carried out by an
authorised contractor.
▶ Only use original spares.
▶ Install a pressure relief valve that is approved for potable water in the
cold water pipe.
▶ Never close the pressure relief valve!
Function
▶ Observe these installation and maintenance instructions to ensure
trouble-free operation.
▶ Risk of scalding! When the appliance is in operation, temperature in
excess of 60 °C can occur.
22
Instructing the customer
▶ Instruct the user in how to operate the cylinder and draw their
attention to safety-related points.
▶ Hand over the installation and maintenance instructions to the user
for safekeeping near the heating system.
2
Regulations
Observe the following directives and standards:
• Local regulations
• EU Directive 2010/30/EU
– EU Regulation 812/2013
– EU Regulation 814/2013
Installation of, and equipment for, heating and water heating systems:
• EN standards
– EN 12828: Heating systems in buildings - Design for DHW heating
systems
– EN 12897 – Water supply - regulation for ... Cylinder water heaters
(product standard)
– EN 1717 – Protection of potable water against contamination...
3
Environmental protection/disposal
Environmental protection is a key commitment of the Bosch Group.
Quality of products, efficiency and environmental protection are equally
important objectives for us. All legislation pertaining to the
environmental protection is strictly observed. To protect the
environment we use the best possible technology and materials, subject
to economic considerations.
Packaging
Where packaging is concerned, we participate in country-specific
recycling systems that ensure optimal recycling. All of our packaging
materials are environmentally compatible and can be recycled.
Old appliances
Old appliances contain materials that must be recycled.
The relevant assemblies are easy to separate, and all plastics are
identified. In this way the individual assemblies can be easily sorted and
directed to recycling or disposal.
4
Maintenance
With cylinders, apart from visual inspection, no particular maintenance
or cleaning work is necessary.
▶ Check all connections externally for leaks once a year.
▶ In the event of a fault, contact an approved contractor or the customer
service.
FW 302 / FW 502-504 / FW 752-756 – 6 720 801 195 (2017/11)