Displays - BOB-HOME ESPRESSO CLUB Bedienungsanleitung

GB
D I S P L A Y S
Each button has a light indicator around, and there is a triangular light indicator on the fixing ring of
steam knob. These indicators showing the function and status of the device.
Preheating
Press the POWER button once, the machine enters the preheating state, and the four indicators flash
white in the form of a breathing lamp. The machine need around 50S to preheat.
Standby
After the machine is preheated, it enters the standby state. The four indicators are always illuminated
white.
Make hot water
In the standby state, press the HOT WATER button once to enter the hot water function. At this time,
the POWER button indicator becomes constant white, the HOT WATER indicator flashes white in the
form of a breathing lamp, SINGLE CUP and DOUBLE CUP indicators extinguish. Press the HOT
WATER button again, the hot water function stops, and the machine enters the standby state.
Single Espresso
In the standby state, press the SINGLE CUP button once to enter the function of brewing a single cup
of coffee. At this time, the POWER button indicator is always white, and the single cup indicator
flashes white in the form of a breathing lamp, hot water indicator and double cup indicator go out.
Pressing the SINGLE CUP button once again or waiting for the ending of single cup function , the
machine enters the standby state