Option Menu List - Yamaha CD-NT670 Bedienungsanleitung

Option settings

Option menu list

Menu Sub menu Default
1
Preset Delete * ( P.33)
1
Auto Preset
*
1, 2
Initial Scan* * ( P.29)
1, 2
Tune Aid* * ( P.31)
Status
LAN MAC Address
WiFi MAC Address
Bluetooth Addr
MusicCast Info
SSID
Direct Info
Network
Info
Network Name
vTuner ID
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Default Gateway 0.0.0.0
DNS Server(P) 0.0.0.0
DNS Server(S) 0.0.0.0
44
En
Function
Deletes preset stations.
Sets the Auto Preset.
Scans all receivable frequencies and registers
them in the unit.
Shows the level of received DAB signal.
Shows the connection status of the
NETWORK jack.
Shows MAC address.
Shows MAC address.
Confirms the address.
Shows the information on MusicCast.
Confirms the SSID.
Shows the information for Wireless Direct.
Shows the name of the unit that appears on
the network.
Confirms the vTuner ID.
Confirms the IP address.
Confirms the subnet mask.
Confirms the default gateway.
Confirms the primary DNS server.
Confirms the secondary DNS server.
Menu Sub menu Default
Select Network Wired
Network
Config
DHCP On
AutoPowerStdby On
System
Net Standby On
Config
Bluetooth On
Initialize Set
Version
Firmware
Update
Update Network Updates the firmware of the unit (
*1 Only when the radio is played back
*2 CD-NT670D only
Function
Selects a network connection method.
Enables/disables DHCP.
Sets the unit into standby mode automatically
( P.10).
Sets the eco standby ( P.10).
Sets .
Resets to the factory default settings.
Shows the firmware version of the unit.
P.45).