Herunterladen Inhalt Inhalt Diese Seite drucken

Detergents; Connecting The Water Supply; Connecting To The Power Supply - Stihl RE 90 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für RE 90:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
4 Safety Precautions
4.8

Detergents

WARNING
■ If detergents come into contact with the skin or eyes, the
skin or eyes may be irritated.
► Observe the Instruction Manual for the detergent.
► Avoid contact with detergents.
► If skin contact occurs: Wash affected areas of skin with
plenty of water and soap.
► If eye contact occurs: Flush eyes with plenty of water for
at least 15 minutes and consult a doctor.
■ Using the wrong detergent can damage the pressure
washer or the surface of the object being cleaned and be
harmful to the environment.
► Use detergents that are approved for use with high-
pressure cleaners.
► Observe the Instruction Manual for the detergent.
► If in any doubt: Contact a STIHL servicing dealer.
4.9

Connecting the water supply

WARNING
■ Releasing the spray gun trigger causes a kickback in the
water hose. A kickback can force dirty water back into the
drinking water main. This can pollute the drinking water.
► Do not connect the pressure washer directly
to the drinking water main.
► A backflow preventer complying with the applicable
regulations should be fitted in-line when connecting a
pressure washer to the drinking water main. If drinking
water has passed through the backflow preventer, it can
no longer be regarded as drinking water.
0458-814-9821-B
■ Dirty or sandy water can damage components of the
pressure washer.
► Use clean water.
► If using dirty or sandy water: Use a water filter with the
pressure washer.
■ If the water supply to the pressure washer is insufficient,
components of the pressure washer may be damaged.
► Turn tap fully on.
► Make sure there is a sufficient supply of water to the
pressure washer, @ 19.1.

4.10 Connecting to the power supply

Contact with live parts can occur for the following reasons:
– The connecting cord or the extension cord is damaged.
– The mains plug of the connecting cord or extension cord
is damaged.
– The socket is not properly installed.
DANGER
■ Contact with live parts can result in electric shock. The
user may be seriously injured or killed.
► Make sure that the connecting cord, extension cord and
their plugs are undamaged.
If the connecting cord or the extension cord is
damaged:
► Do not touch the damaged areas.
► Unplug the mains plug from the socket.
► Make sure your hands are dry before touching the
connecting cord, extension cord or plugs.
► Plug the mains plug of the connecting cord or extension
cord into a properly installed, shockproof socket with the
correct fuse rating.
► Connect the pressure washer via a residual current
circuit breaker (30 mA, 30 ms).
English
47

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis