List of pictograms used
Please read the operating instructions!
Observe the warnings and safety
notices!
Hand-Held Stapler Set
Introduction
We congratulate you on the purchase of
your new product. You have chosen a
high quality product. Familiarise yourself
with the product before using it for the first time. In
addition, please carefully refer to the operating in-
structions and the safety advice below. Only use
the product as instructed and only for the indicated
field of application. Keep these instructions in a
safe place. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.
Proper Use
The stapler gun is intended exclusively for stapling
cardboard, leather, cloth (textile or natural fibres)
or similar lightweight materials on to hardwood, soft-
wood, chipboard or similar plywood-type materials.
Any use other than previously mentioned or any
product modification is prohibited and can lead to
injuries and / or product damage. The manufactur-
er is not liable for any damages caused by any use
other than for the intended purpose. The product is
not intended for commercial use.
Danger of loss of life and accident to
infants and children!
Wear personal protective equipment
and always wear safety glasses.
Description of parts
Adjusting knob
1
Trigger
2
Carriage
3
Hook
4
Staple channel
5
Side wings
6
Driver
7
Supply Scope
Immediately after unpacking, check that the delivery
is complete and that the product and all its parts are
in perfect condition. Do not under any circumstances
assemble the product if the delivery is incomplete.
1 Hand-Held Stapler Set
500 Staples (8 mm)
500 U-staples (12 mm)
500 T-nails (10 mm)
1 Instructions for use
Staples / nails
Note: The precision components of the device are
designed to use the following standard, widely
available staples and nails:
Introduction
GB
5