Adjusting The Recording Level (Peak Search) - Sony CDP-CE575 Bedienungsanleitung

6
Start recording on the deck and then
press H on the player.
7
Reverse the tape to side B and press
H or X on the player to resume
playing the remaining tracks.
To cancel Time Edit
Press CONTINUE.
Tips
• You can programme the tracks you want in
advance. Create a programme selecting the desired
tracks, then follow Steps 2 to 7. Be careful that the
total playing time of the programme does not
exceed the tape length of one side.
• You can set the tape length freely using
l AMS L.
Example: When the tape length of one side is 30
minutes and 15 seconds
1 To set the minutes, turn l AMS
L until "30" appears in the display,
then push l AMS L.
2 To set the seconds, turn l AMS
L until "15" appears in the display,
then push l AMS L.
• To check and change your programme, see pages 13
and 14.
Adjusting the Recording
Level (Peak Search)
The player locates the highest level among the
tracks to be recorded to let you adjust the
recording level before you start recording.
1
Before you start playing, press PEAK
SEARCH.
"PEAK" flashes in the display and the
player starts scanning the disc searching for
the highest peak level.
After scanning all the tracks, the player
repeats the portion with the highest peak
level.
2
Adjust the recording level on the deck.
3
Press x on the player to stop Peak
Search.
"PEAK" disappears from the display.
Notes
• The portion with the highest level may differ every
time you try the adjustment on the same disc. The
difference is, however, so slight that you won't
find any problem in adjusting the recording level
precisely.
• Peak Search does not operate while you open the
disc tray by pressing the EX-CHANGE button.
15
GB