Husqvarna LC 141VLi Bedienungsanweisung Seite 15

causes heavy vibration and a
very high risk that the blade
becomes loose.
If the blade hits an object or if
•
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery (model
LC 141VLi and LC 141Li) or
disconnect the power cord
(model LC 141C). Examine
the product for damages.
Repair damages or let an
authorised service agent do
the repair.
Never attach the motor brake
•
handle permanently to the
handle when the motor is
started.
Put the product on a stable,
•
flat surface and start it. Make
sure that the blade does not
hit the ground or other objects.
Always stay behind the
•
product when you operate it.
Let all the wheels stay on the
•
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
Do not tilt the product when
•
the motor is started.
Be careful when you pull the
•
product rearward.
71 - 005 - 18.05.2018
Never lift up the product when
•
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery
(model LC 141VLi and
LC 141Li) or disconnect the
power cord (model LC 141C).
Do not walk rearward when
•
you operate the product.
Stop the motor when you
•
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
Do not run with the product
•
when the motor is started.
Always walk when you operate
the product.
Stop the motor before you
•
change the cutting height.
Never make adjustments with
the motor started.
Never let the product stay out
•
of view with the motor started.
Stop the motor and make sure
that the cutting equipment
does not rotate.
Safety instructions for operation
Personal protective equipment
WARNING: Read the warning instructions
that follow before you use the product.
Personal protective equipment
•
cannot fully prevent injury but
it decreases the degree of
15