Random Play - Yamaha CDRD651 Bedienungsanleitung

....................................................... PLAYBACK FUNCTIONS
To check program data
1.
Press PROG during programming to display the
track number of the first track.
2.
Each time t or y is pressed, the programmed
track numbers and their order in the program can
be checked.
To correct program data
1.
Press t or y during programming to select the
track number to be corrected. The track number
blinks in the display.
2.
Press the numeric buttons to select a track to
replace the one displayed. The previously
programmed track is cleared from the memory
and the new one is displayed.
3.
After correction has been complete, press PROG.
To stop program play
Press a and the first programmed track number is
displayed. To resume program play again from the
beginning of the program press w.
To cancel the program play mode
Press CLEAR or a while this unit is in the stop mode.

Random Play

You can play all tracks in the disc in a random sequence.
REPEAT RANDOM
A
A
RNDM
1.
Load a disc and press RANDOM on the remote.
The RNDM indicator appears in the display and
random play begins.
1 0:12
RNDM
2.
To stop the random play, press a (RANDOM on
the remote). The RNDM indicator in the display
turns off.
3.
To play a random sequence with two CDs, press
RANDOM on the remote after relay play of the
two CDs is set as described on page 22.
CLEAR
RANDOM
B
B
L
dB –60 –30 –I0 –6 –4 –2 –I 0 OVER
R
25
E-