Hilti DD-WMS 100 Original Bedienungsanleitung Seite 25

Display icons
The water level is too high.
The water level is too low.
Unknown Error
3.8 Bluetooth
®
This product is equipped with Bluetooth (optional).
Bluetooth is a wireless data transfer system with which the two Bluetooth-enabled products can communicate
with each other over a short distance.
To ensure a stable Bluetooth connection, the interconnected products must be within sight of each other.
Bluetooth functions of this product
•
Automatic switch-on and switch-off of the water supply when drilling in the modes Recycling
Water Supply .
• Display of service messages on the screen of a connected diamond core drilling machine.
Switching Bluetooth on or off
Hilti products ship ex-works with Bluetooth deactivated. Bluetooth switches itself on automatically
during initial operation.
•
To switch off, press and hold the
•
To switch on, press the
Connecting products
Connection to the diamond core drilling machine is maintained until the diamond core drilling machine is
connected to a different WMS 100, or Bluetooth is switched off. The connection is also maintained after
switching the product off and on again, and the products reconnect to each other automatically.
•
To connect a Hilti diamond core drilling machine, press the Bluetooth button
on.
You can connect a different diamond core drilling machine within the connectivity range to the WMS 100:
1. Deactivate Bluetooth on the water treatment system currently connected and then switch on Bluetooth
again.
2. Restart the connection process to the other diamond core drilling machine.
The time frame for the connection to a different diamond core drilling machine is approximately 2
minutes. When the 2 minutes have expired, the connection process will be canceled.
License
Bluetooth is not available in all countries.
The Bluetooth word mark and the logo are registered trademarks and the property of Bluetooth SIG, Inc.
®
and Hilti has been granted a license to use these trademarks.
*2154323*
Description
Too much water in the water and waste material container. The WMS 100
produces no vacuum.
Switch on the water supply mode until the MAX service indicator goes out.
Too little water in the water and waste material container. A functioning
water supply is no longer ensured.
Fill the water and waste material container up to the MAX mark.
The diamond core drilling machine has received an unknown error code
from the WMS 100.
Check the WMS 100 for faults and consult the operating instructions of the
WMS 100 for a solution.
button for at least 10 seconds.
button.
2154323
or
with Bluetooth switched
English 19