Symbols On The Product; Product Information; Declaration Of Conformity; General Safety Instructions - Hilti DD-WMS 100 Original Bedienungsanleitung

1.3 Product-dependent symbols
1.3.1

Symbols on the product

The following symbols are used:
Do not transport by crane
Bluetooth (optional)
1.4

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Water management system
Generation
Serial no.
1.5

Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2 Safety
2.1

General safety instructions

In addition to the safety instructions given in the various sections of these operating instructions, the following
points must be strictly observed at all times.
▶ Read all the instructions. Failure to follow all the instructions listed below may result in electric shock,
fire and/or serious injury.
▶ If the appliance is used in conjunction with an electric tool, read and follow the operating instructions for
the electric tool and all the warnings.
▶ Modification of the appliance is not permitted.
▶ Use the right appliance for the job. Do not use the appliance for purposes for which it was not intended.
Use it only as directed and when in faultless condition.
▶ Before beginning work with the appliance, find out how to operate it correctly and about any hazards
associated with the materials it will be picking up and how these materials can be disposed of.
▶ Take the influences of the surrounding area into account. Do not use the appliance where there is a risk
of fire or explosion.
▶ The appliance may only be used by persons who are familiar with it, have been trained on how to use it
safely and who understand the resulting hazards. The appliance is not intended for use by children.
▶ Store appliances in a secure place when not in use. When not in use, appliances must be stored in a dry,
high place or locked away out of reach of children.
2.2

Electrical safety

▶ The plug on the supply cord of the appliance must match the outlet. Do not change the plug in any way.
Do not use adapter plugs with earthed (grounded) appliances. Unmodified plugs and matching outlets
reduce risk of electric shock.
14 English
DD-WMS 100
DD-WMS 100 BLE
01
2154323
*2154323*