Setting Library Codes - Yamaha RX-N600 Bedienungsanleitung

Setting library codes

You can operate multiple YAMAHA receivers or
amplifiers in the same room with the supplied remote
control simultaneously. Set the appropriate library code to
select and operate the desired component with the
supplied remote control.
Setting remote control AMP ID library
codes
Select one of the following codes to set the remote control
AMP ID library code for the component you want to use.
1
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
2
Press the numeric buttons to enter the code
number "00001" or "00002".
The TRANSMIT indicator on the remote control
flashes twice, and the AMP ID library code is
changed.
STEREO MUSIC ENTERTAIN MOVIE
1 2 3
STANDARD SELECT EXTD SUR. DIRECT ST.
5 6 7
SPEAKERS ENHANCER NIGHT STRAIGHT
ENT.
9 0 10
EFFECT
AMP ID
library code Function
*1
00001 To operate this unit using
(initial setting) the default code.
To operate this unit using
00002
an alternative code.
*1
The remote control setting
*2
The setting of this unit (see page 82)
Notes
• You need to set the corresponding remote control AMP ID
of this unit in the advanced setup (see page 82).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
TRANSMIT
Flashes
4
TRANSMIT
8
Flashes
Remote
control AMP
ID *2
ID1
(initial setting)
ID2
Setting remote control TUNER ID library
codes
Select one of the following codes to set the remote control
TUNER ID library code for the component you want to
use.
1
Press TUNER to select "TUNER" as the input
source.
TUNER
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
3
Press the numeric buttons to enter the code
number "81916" or "81917".
The TRANSMIT indicator on the remote control
flashes twice, and the TUNER ID library code is
changed.
STEREO MUSIC ENTERTAIN MOVIE
1 2 3
STANDARD SELECT EXTD SUR. DIRECT ST.
5 6 7
SPEAKERS ENHANCER NIGHT STRAIGHT
9 0 10
EFFECT
TUNER ID
library code Function
*1
81916 To operate this unit using
(initial setting) the default code.
To operate this unit using
81917
an alternative code.
*1
The remote control setting
*2
The setting of this unit (see page 83)
Notes
• You need to set the corresponding remote control TUNER
ID of this unit in the advanced setup (see page 83).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
REMOTE CONTROL FEATURES
TRANSMIT
Flashes
4
TRANSMIT
8
Flashes
ENT.
Remote
control
TUNER ID *2
ID1
(initial setting)
ID2
87
En