Installation - THERMEx Integrata Montageanleitung

Integrata

Installation

Integrata is supplied without pre-drilled fixing holes, which allows you much greater free-
dom when installing the unit to the ceiling.
The following must be observed prior to installation:
The air ventilation outlet must be connected through either the roof or a wall.
Integrata is supplied with cables, control box and remote control.
The ceiling unit must be mounted in the ceiling.
NB: Ensure ceiling is strong enough to support the canopy.
The remote control receiver must be placed beside the ceiling unit in the room.
The control box must be mounted on a walls or beam.
The control box is fitted with:
2 x cables for lights in the ceiling unit
1 x flat cable for remote control receiver
1 x cable for the power supply (labelled: 230V)
1 x cable for external motor (labelled: motor)
It is important not to use a common earth as this will damage the electrical system
of the unit.
When connecting directly to the mains (without a plug) it is necessary to install a multi-pole
circuit breaker between the mains and the unit electrical system. The circuit breaker must
be of a size and type in accordance with existing legislation on power supply.
32