Yamaha HTR-5730 Bedienungsanleitung Seite 18

CONNECTIONS
6CH INPUT
FRONT
DIGITAL SURROUND
INPUT
3
CD
SUB CENTER
WOOFER
COAXIAL
CD
OPTICAL
DTV
2
/CBL
IN
(PLAY)
1
MD
DVD
/CD-R
OUT
(REC)
R L
AUDIO
Subwoofer
system
FRONT SPEAKERS terminals
You can connect up to two speaker systems to these
terminals. When using only one speaker system, connect
it to either of the FRONT A or the FRONT B terminals.
SURROUND SPEAKERS terminals
A surround speaker system can be connected to these
terminals.
CENTER SPEAKER terminals
A center speaker can be connected to these terminals.
SUBWOOFER jack
When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,
connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the
front, center and/or surround channels to this jack in accordance with your SPEAKER SET selections. The LFE (low-
frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance
with your SPEAKER SET selections.
Notes
• The cut-off frequency of the SUBWOOFER jack is 90 Hz.
• If you do not use a subwoofer, allocate the signals to the front left and right speakers by changing the setting of "SOUND 1
SPEAKER SET" item "1D BASS" on the set menu to FRONT.
• Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit's remote control
(see "SETTING THE SPEAKER LEVELS" on page 45).
16
Front A speaker
Right Left
1 2
AUDIO VIDEO TUNER
R L
DVD
AM
ANT
DTV
/CBL
GND
V-AUX
Ω
75 UNBAL.
FM
IN
ANT
VCR
OUT
SUB MONITOR
WOOFER OUT
OUTPUT
4
Surround speaker
Right Left
5
SPEAKERS
SURROUND
R L
Ω
SURROUND : 6 MIN. /SPEAKER
A
CLASS 2 WIRING
FRONT
R L
B
FRONT
CENTER
R L
Ω Ω
FRONT A OR B : 6 MIN. /SPEAKER CENTER : 6 MIN. /SPEAKER
Right Left
Front B speaker
1
3
2
The diagram shows the speaker layout in the listening
room.
6
3
Center
speaker
4
5
6