Controls And Functions; Front Panel - Yamaha DSP-AX1 Bedienungsanleitung

Front Panel

~ STANDBY/ON
Turns this unit on (On mode) and off (Standby mode). When
you turn on this unit, you will hear a click and there will be a
four to five to second delay before this unit can reproduce
sound.
In Standby mode, this unit consumes a small amount of power
so it can respond to the remote control.
Ÿ Remote Control Sensor
Receives signals from the remote control.
! Front Panel Display
Shows information about the operational status of this unit
(see page 10).
⁄ INPUT MODE
Selects the mode of input for sources that output two or more
types of signals to this unit (see page 33).
You cannot control the input mode when you select 6CH
INPUT as the input source.
@ INPUT SELECTOR
Selects the input source (DVD, LD, D-TV, CBL/SAT,
VCR 1, VCR 2, VCR 3, V-AUX, PHONO, CD, TUNER,
TAPE, MD) you want to listen to or watch.
¤ VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
6

Controls and Functions

NATURAL SOUND AV AMPLIFIER DSP-AX1
STANDBY/ON
SPEAKERS
+
–
SET MENU
A B
PHONES BASS TREBLE
0
1 1
2 2 2
3 3 3
4 4 4
– + –
5 5
D I G I T A L
DOLBY
CINEMA DSP
D I G I T A L
S U R R O U N D
INPUT MODE
NEXT 6CH IMPUT EFFECT PROGRAM
BALANCE BASS PROCESSOR REC OUT/ZONE 2
SOURCE/REMOTE
EXTENSION DIRECT
0
1 1 1 1 LD DVD
2 2 2 D-TV MD
CBL/SAT TAPE
0 3 3 3
VCR 1 TUNER
VCR 2 CD
4 4 4
VCR 3 PHONO
+
5 5 L 5 5 R
ON OFF VIDEO AUX
# PHONES
Outputs audio signals for private listening using headphones.
When you connect headphones, no signals are output to the
PREOUT jacks or the speakers.
‹ SPEAKERS A/B
When pushed in (ON), these buttons turn on the set of Main
speakers connected to the A and/or B terminals on the rear
panel.
$ BASS
Adjusts the low frequency response for the left and right Main
speaker channels.
Turn the control to the right to increase the low frequency
response and turn the control to the left to decrease the low
frequency response.
If you increase or decrease the low frequency sound to an
extreme level, the tonal quality from the Center, Front Effect,
Rear Center, and Rear speakers may not match that of the left
and right Main speakers.
› SET MENU – / +
Adjusts the settings and parameter values of SET MENU
items.
VOLUME
INPUT SELECTOR
VIDEO AUX
S VIDEO VIDEO L AUDIO R