How To Use; Power Supply; Removal And Attachment Of Roller Holder - Silvercrest SHE 3 C3 Bedienungsanleitung

__NAS279064_Hornhautentferner_B5.book Seite 63 Mittwoch, 9. November 2016 3:42 15
6.

How to use

• Remove all packing material.
• Check that the delivery is complete.

6.1 Power supply

WARNING! Risk of material damage!
Be sure to observe the correct polarity when inserting the
batteries.
1. Slide the battery compartment lid 7 off the housing 5.
2. If necessary, replace the old batteries with new ones.
3. Figure A: Slide the battery compartment lid 7 back on to
the housing 5.
6.2 Removal and attachment of roller
holder
Removal
• Figure B: press both release buttons 6 simultaneously and
remove the roller holder 2 upwards.
Attachment
1. Figure B: place the roller holder 2 on the top of the device
in such a way, that the cog wheels of the roller and the de-
vice are above one another.
2. Press the roller holder 2 on to the device until it engages au-
dibly.
3. Check that it is secure.
63
GB