Menu items
Speaker Level
Selects the speaker
Adjusts the speaker level
Speaker Distance *
Selects the speaker
Adjusts the speaker distance
AF Regional
TA Volume
Program Search
*
3
Selectable only for "DISC" or "SD."
*
4
This subwoofer level setting takes effect only when surround is activated (
*
5
Not selectable when only the front speakers are activated.
*
6
Depends on the amplifier gain control.
Selectable settings, [reference page]
You can adjust the output level of the activated speakers (
see "Speaker Size" on page 45), monitoring the test tone.
• Front Left/Center/Front Right/Rear Right/
Sub Woofer*
speaker in the range of –10dB to +10dB; Initial 00.
• Press and hold ENT to turn on and off the test tone—Test
Tone: ON, OFF.
5
You can adjust the speaker output timing.
• Front Left/Center/Front Right/Rear Right/Rear Left:
adjust the speaker distance from the listening position in
the range of 15 cm/6 inches to 600 cm/240 inches in 15-
cm/6-inch step. [Initial: 120 cm (for center speaker), 150
cm (for the other speakers)]
• Press and hold DISP to change the measuring unit—cm and
inch.
When the received signals from the current station become
weak...
Off :
Cancels—not selectable when "DAB AF" is set to
"On."
AF Regional: Switches to another station broadcasting the
same programme. (REG indicator lights up.)
AF:
Switches to another station. The programme may
differ from the one currently received (AF indicator
lights up),
00 to 30 or 50*
☞
Off, On,
/Rear Left: adjust the output level of each
4
☞
[14].
☞
6
; Initial 15,
[13].
[14]
46
☞
☞
also page 49).