Ventilation Hose And Connection (For Products Equipped With An Outlet Vent) - Beko DV 8120 N Bedienungsanleitung

B
DANGER!
• Do not place the product on top of the
power cable.
• Keep at least 1.5 cm distance to walls of
other furniture.
• The rear surface of the tumble dryer shall
be placed against a wall
3.2 Ventilation hose and connection
(for products equipped with an outlet
vent)
Ventilation hose allows exhaust air from inside
the machine
Vented dryer has 1 air outlet.
Stainless sheet metal or aluminum pipes can
be used instead of a hose. The pipe diameter
should be minimum 10 cm.
Maximum hose and pipe lengths are given in
the table below.
Maximum length
1 elbow 45°
1 elbow 90°
1 elbow 90° short
1 wall passage
C
NOTE
• Each elbow and other passages should
be subtracted from the maximum length
stated above.
To connect a ventilation hose;
1. Connect the air outlet hose to the
hose spacer piece by turning it
counterclockwise.
2. Make the hose passages as shown
below.
Dryer / User Manual
Hose Pipe
4 m 5 m
-1.0 m -0.3 m
-1.8 m -0.6 m
-2.7 m
-2.0 m -2.0 m
C
NOTE
• Exhaust of humid air from the dryer
into the room is inconvenient. It may
damage the walls and furniture in the
room.
• The ventilation hose can be routed
outdoors via a window or it can be
connected to the air outlet in the
bathroom.
• Air outlet hose must be routed directly
to the outdoors. There must be a limited
number of elbows as not to hinder
ventilation.
• To prevent water accumulation in the
hose, make sure that it is not folded on
the floor.
B
DANGER!
• The ventilation hose should not be
connected to the chimney of a stove or a
fireplace.
• Do not operate your product at the same
time with heaters such as a coal or gas
stove. Airflow may cause the chimney to
flare up.
9