Howto Use; Charging - ZACO -A9s Bedienungsanleitung

• English

HowTo Use

Charging

1. Placing Charging Dock
• Plug the adaptor into the charging doc k;
• Put the charging dock against a wall and remove obstacles and reflective
ob j ects about 1 meter on both sides and about 2 meters in front ;
• Connect to power.
Note:
Once connected to power , indicator light on the charging dock stays on.
2. Turning on Power Switch
Turn on the power switch on the
side ofthe main bod y .
"-" is ON and "O" is OFF.
Note:
Do not switch off the robot after use.
Always keep the robot fully charged for the next task.
For more detailed information, please visit:
))
www.zacorobot.eu
Z/\CO
\
pg