JVC KW-AVX820 Bedienungsanleitung Seite 38

• For DivX/MPEG1/MPEG2/JPEG/MP3/WMA/WAV/AAC,
track is searched within the same folder.
• For DVD-VR, program/playlist search is possible
during Original program playback (PG)/Playlist
playback (PL).
• To erase a misentry, press CLR (clear) while holding
SHIFT.
Using menu driven features
• DVD Video
1
Press TOP M/MENU to enter the menu screen.
% fi @ #
2
Press / / / to select an item you want to
start play.
3
Press ENT (enter) to confirm.
• DVD-VR
1
Press TOP M to enter the Original Program.
Press MENU to enter the Playlist.
% fi @ #
2
Press / / / to select an item you want to
start play.
3
Press ENT (enter) to confirm.
• Original Program/Playlist screen,
• VCD
1
While holding SHIFT, press DIRECT to enter the
search mode.
2
While holding SHIFT, press the number buttons (0
– 9) to enter the desired number.
3
Press ENT (enter) to confirm.
• To return to the previous screen, press RETURN.
Canceling the PBC playback... (VCD)
1
Press , then press DIRECT while holding SHIFT.
2
While holding SHIFT, press the number buttons
(0 – 9) to enter the desired number.
3
Press ENT (enter) to confirm.
• To resume PBC, press TOP M/MENU.
38
Operations using the
on-screen bar
(DVD-Video/DVD-VR/DivX/MPEG1/MPEG2/
JPEG/VCD)
These operations are possible on the monitor using the
remote controller.
1
Show the on-screen bar. (
2
Select an item.
3
Make a selection.
If pop-up menu appears...
• To cancel pop-up menu, press RETURN.
55.
• For entering time/numbers, see the following.
Entering time/numbers
%
Press
move to the next entry.
• Each time you press
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not required to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD: _:_ _:_ _ (Ex.: 1:02:00)
%
Press
twice, then press ENT (enter).
Removing the on-screen bar
(twice)
fi
/ to change the number, then press
% fi
/ , the number increases/
#
once, then twice to go to the third entry,
39)
@ #
/ to
%