Samsung SEB-100 Bedienungsanleitung Seite 5

SEB-100 Installation
1. Choose a place hard enough to endure 5 times the total weight of the
product before installation.
E
2. Separate the SEB-100 as shown below.
3. Put a extension box in the installation place and fix it with screws as
shown below.
Arrange the 2 cables in need well and connect the camera cable to IN and
the monitor cable to OUT.
IN OUT
8
4. Check the distance between the camera and monitor and turn the 1~4
switches on and off to control the distance. Then, close the case. (Refer to
Table 1 in Page 5 for the installation of SW2).
SW2
E
9