Connecting An Already-Paired Device Via Bluetooth; Disconnecting A Bluetooth Connection - Yamaha TSX-B141 Bedienungsanleitung

Connecting an already-paired device via Bluetooth

Once pairing has been completed, connecting a Bluetooth will be easy the next time.
Connecting from this unit
Front panel
SOURCE
Bluetooth indicator
Connecting from the connecting device
1
In the Bluetooth settings of the connecting device, turn Bluetooth on.
2
From the Bluetooth connection list of the connecting device, choose this unit (TSX-B141
Yamaha).
The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this
unit will light.
Connecting with the NFC function
When using an already-paired smartphone with the NFC function, holding it over the NFC mark establishes a
Bluetooth connection.
Note
Bluetooth connections cannot be established from the connecting device when this unit is in Eco Standby
mode. Turn the unit on.

Disconnecting a Bluetooth connection

If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth
connection will be disconnected.
• Press the (Bluetooth) button on the unit. (Or hold down
• Set the unit to standby mode.
• Turn off the Bluetooth setting of the connecting device.
• Hold the smartphone with the NFC function over the NFC mark during Bluetooth connection.
(Bluetooth)
button
LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE
Follow procedure or
A B
device.
Set SOURCE to BLUETOOTH.
A
Press the (Bluetooth) button on the right
B
side of the front control panel.
The Bluetooth indicator will blink on the front panel
display; this unit will search for the connecting
device that was most recently connected via
Bluetooth, and will then establish a connection (You
must first turn on the Bluetooth setting of the
connecting device).
When the Bluetooth connection has been
established, the Bluetooth indicator will light.
on the remote control.)
below to connect the
13
En