Technical Data - Hilti SPN 6-A22 Bedienungsanleitung

3.5 Li-ion battery charge status display
The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED flashes.
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs flash, please refer to the information given in the
Troubleshooting section.
4

Technical data

The nibbler comes with the SPN­CN accessory tool as standard. The SPN­RN and SPN­RL accessory tools
are available as optional accessories.
Rated voltage
Weight in accordance with EPTA Procedure 01
including B22⁄8.0 battery
Stroke rate at idle speed
Starting hole diameter
Smallest radius for curved cut-outs
Radius
Cutting track width
Permissible steel thickness, steel up to
400 N⁄mm²
Permissible steel thickness, steel up to
600 N⁄mm²
Permissible steel thickness, steel up to
800 N⁄mm²
Permissible material thickness, aluminum up to
250 N⁄mm²
4.1 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
18 English
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
SPN­CN SPN­RN
21.6 V 21.6 V
3.1 kg 3.0 kg
620 /min ... 620 /min ...
1,370 /min 1,370 /min
17 mm 24 mm
4.0 mm •/•
•/• 50 mm
8.0 mm 5.0 mm
2.0 mm / 14 ga 2.0 mm / 14 ga
1.5 mm / 16 ga 1.5 mm / 16 ga
1.0 mm / 20 ga 1.0 mm / 20 ga
2.5 mm / 10 ga 3.0 mm / 9 ga
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
2253586
*2253586*
SPN­RL
21.6 V
3.3 kg
620 /min ...
1,370 /min
24 mm
•/•
50 mm
5.0 mm
2.0 mm / 14 ga
1.5 mm / 16 ga
1.0 mm / 20 ga
3.0 mm / 9 ga