Basic Operations - Kenwood KMM-BT356 Bedienungsanleitung

AMAZON ALEXA
(for
3
Tap "Add Device".
4 Tap "Automotive Accessory" or "Headphones" from the list of device
types.
5 Tap the name of your receiver ("KMM-BT306"/"KMM-BT206") and
follow the instructions.
Once the setup process is completed, the Alexa mobile application will
establish a connection with this unit.
• The Alexa connection can be disconnected if:
– A2DP profile is disconnected
– Bluetooth is disconnected
– This unit is turned off
– Any other conditions depending on the connected device.
To establish Alexa connection again, reconnect the A2DP profile.
• Alexa connection cannot be established again if you:
– Reinstall Alexa mobile application
– Delete the paired device and perform pairing again (for Android device)
To establish Alexa connection again, perform the setup process again.
• You can check the Alexa connection from the Alexa mobile application.
If the name of this unit appears on the screen of "ALL DEVICES", you do not
need to perform setup process again.

Basic operations

Once Alexa connection is established...
1 Press on the unit to speak with Alexa.
The display shows: "ALEXA"
22
ENGLISH
/ )
"LISTENING...".
2
Communicate with Alexa via the connected microphone. (Page 15)
"THINKING..." appears when Alexa is processing your voice input.
"SPEAKING..." appears while Alexa is responding to your voice input.
"ALEXA" or display information such as playing time, song title, etc.
appears while Alexa is in idle state.
• To return to the previous source before ALEXA, press B SRC (or press SRC
on the remote control).
• To activate Alexa, press .
• To cancel current listening state, press .
• To cancel current thinking/speaking states and go to listening state,
press .
• Only one Alexa connection can be connected at one time.
• "DISCONNECTED" appears if the unit is disconnected from Alexa mobile
application or the Bluetooth connection is disconnected.
Start listening
While in Alexa idle state...
1
Press on the unit to activate Alexa.
The display shows: "LISTENING...".
2
Communicate with Alexa via the connected microphone. (Page 15)
3
During music playback in ALEXA source, you can perform the
following operations:
To On the faceplate
Press 6 IW.
Play back/pause
Press S / T.
Reverse skip/Forward skip
During music playback, press to pause the music and activate Alexa. You
can now start to communicate with Alexa.
On the remote control
Press ENT IW.
Press S / T (+).