Bluetooth - Audio - Kenwood KMM-BT356 Bedienungsanleitung

Bluetooth®
[INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; [NO]: Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears on the display.
2
Search and select the name of your receiver ("KMM-BT356"/
"KMM-BT306"/"KMM-BT206") on the Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold B SRC to turn off the unit.
20
ENGLISH
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1 Press B SRC repeatedly (or press SRC on the remote control) to select
BT AUDIO.
• For : Pressing
2
Operate the audio player via Bluetooth to start playback.
To On the faceplate
Press 6 IW.
Play back/pause
Select group or Press 2
folder
Reverse skip/ Press S / T.
Forward skip
Reverse/Fast-forward Press and hold S / T.
enters BT AUDIO directly.
On the remote control
Press ENT IW.
/ 1 . Press #FM+/ AM–.
Press S / T (+).
Press and hold S /
T (+).