Alert Notices And Symbols - EKOM ASPINA-D0 M Die Anleitung Zur Installation, Bedienung Und Wartung

ASPINA DO M
• Prior to putting into operation, check for possible damages on the appliance and the air
connectors. Damaged cables and sockets/plugs must be replaced immediately.
• In the case of a dangerous situation or a technical failure, immediately disconnect the
appliance from mains supply.
• During all repairs and maintenance:
- ensure that the mains plug is removed from the power socket
- pressure pipes must be air vented
- pressure must be released from pressure tank.
• This appliance can only be installed only by a qualified expert.
1.5.

Alert notices and symbols

For your information, the symbols below are used in the installation, operation and
maintenance manual, on packaging materials and on the product :
Information or instructions to prevent any injury to health or material
damage to the compressor.
Alert against dangerous electric voltage.
Special information regarding the correct use of the appliance and other
warnings.
CE – marking
Attention! Hot surface.
Handling mark on packaging – Fragile, handle with care
Handling mark on packaging – This way up (Vertical position of freight)
Handling mark on packaging – Protect against humidity
Handling mark on packaging – Temperature of storage and transport
Handling mark on packaging – Limited stacking
Mark on packaging – Recyclable material
Connection of protective ground wire
Connector for equipotential connection
Fuse
Alternating current
Danger of biological hazard
INSTALLATION – OPERATION – MAINTENANCE
- 16 - NP-DO M-19_11-2010.doc