Tips For Better Acoustics - Quadral AURUM Bedienungsanleitung

right
Subwoofer
If your surround amplifier has a "line subwoofer" output, you can make use of this by using the Y cable supplied
with the subwoofer (see illustration page 8). In this case, you connect the front speakers directly to the front
speaker terminals of your amplifier. Refer to the connection diagram for wiring your surround system.
Refer to the user manual of the active subwoofer for the necessary settings on your subwoofer!
1. The AURUM stand-mounted loudspeakers are fitted with a holder for spikes in order to achieve better
acoustic decoupling of loudspeaker from the floor. Use of spikes can be advantageous dependent on the
nature of the living room and the floor.
AURUM spikes can be obtained separately as an accessory from your dealer.
2. In order to achieve better acoustic decoupling from the mounting surface for shelf or centre speakers, lay
each of these loudspeakers on 4 self-adhesive felt washers.
Subwoofer
Low Level connection
Surround-amplifier

TIPS FOR BETTER ACOUSTICS

EN
Left
9