Toshiba RAS-M10YDCV-E Betriebsanleitung Seite 15

Combined timer (Setting both ON and OFF timers simultaneously)
OFF timer → → → → → ON timer
(Operation → → → → → Stop → → → → → Operation)
This feature is useful when you want to stop the air conditioner after you go to sleep, and start it again in the
morning when you wake up or you return home.
Example:
To stop the air conditioner and start it again next morning.
Setting combined TIMER
(1) Push the OFF button.
(2) Push the TIMER button to adjust the OFF timer.
(3) Push the ON button.
(4) Push the TIMER button to adjust the ON timer.
(5) Push the SET button.
SET
ON timer → → → → → OFF timer
(Stop → → → → → Operation → → → → → Stop)
You can use this setting to start the air conditioner when you wake up and stop it when you leave the house.
Example:
To start the air conditioner next morning and stop it.
Setting combined TIMER
(1) Push the ON button.
(2) Push the TIMER button to adjust the ON timer.
(3) Push the OFF button.
(4) Push the TIMER button to adjust the OFF timer.
(5) Push the SET button.
SET
• Either ON or OFF timer function which is closer to the current time, is activated first.
• If the same time is set for both ON and OFF timers, no timer operation is performed.
Also, the air conditioner may stop operating.
Every day combined timer
(Setting both ON and OFF timer simultaneously and activate every day.)
This feature is useful when you want to use combined timer at the same time every day.
Setting combined TIMER
(1) Push the ON button.
(2) Push the TIMER button to adjust the ON timer.
(3) Push the OFF button.
(4) Push the TIMER button to adjust the OFF timer.
(5) Push the SET button.
SET
(6) After step (5), an arrow mark ( or ) flashes for about 3 seconds and
during this flashing, push the SET
• During the every day timer is activating, both arrows ( , ) are indicated.
Cancel the timer operation
Push the CLR button.
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF timer) clock display is
disappeared so as to show the setting time. To see the present time, push
SET button briefly and the present time is displayed after about 3 seconds.
button.
SET
12
Operation Operation again
Stop
Operation
Stop
SWING
ON
Stop
AM
:
ON
OFF
˚ C
AM
:
AUT UTO
PRESET
START/STOP
FAN MODE AUTO
ECO Hi-POWER
TIMER
FIX MEMO
OFF SET CLR
FILTER
RESET CLOCK CHECK