Info - Power One Aurora PVI-3.8-I-OUTD-S Installationshandbuch Und Benutzerhandbuch

Installation and operating manual
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
5.5.7

Info

From this menu, you can access all the AURORA inverter data and display the grid
standard and the chosen language through the specific selectors.
The menu is structured as follows:
Product ID (part number)
Serial No. (serial number, week, year of production)
Firmware (firmware revision level)
Country Selector
Current value (currently set standard)
New value (standard that will be set upon re-start if the switches are switched
over)
Set new (manually set the new selected standard)
Residual time (for which it is still possible to change the applied standard)
The last menu allows you to see which standard is currently set in the inverter (Current
Value); which will be applied to the next start-up (New Value) after acting on the
selectors; manually set the new value (Set New Value); and set the time remaining for
making changes to the applied standard (Residual Time).
When the Residual Time is finished, it will no longer be possible to make changes to
the applied standard and an unblocking code will be needed (see paragraph 3.4.7). The
time period is 24 hours of operation with the inverter connected to the power supply
grid.
Page 77 of 95