Use Of Dishwasher Salt - Zanussi zdt111 Benutzerinformation

3. After a few seconds:
– programme light B turns off
– programme light A goes on flashing
– End of programme light starts flashing:
the number of flashes corresponds to
current level set. The flashing is repea-
ted with a pause of a few seconds. Ex-
amples: 5 flashes, pause, 5 flashes,
pause, etc... = level 5.

Use of dishwasher salt

CAUTION!
Use only special salt suitable for dishwashers.
Remove any trace of salt. Replace the cap tightly
10
Unscrew the cap.
turning it clockwise until it
stops with a click.
4. To change the level, press the Programme
selection/Cancel button. Each time the
button is pressed the level increases (level
1 follows level 10). The End of pro-
gramme light indicates the new setting.
5. To memorise the operation, switch off the
dishwasher.
Only before filling with
salt for the first time, fill
the salt container with wa-
ter.
IMPORTANT!
Immediately start a complete programme.
IMPORTANT!
Water will overflow from the container as salt is added.
Using the funnel provided,
pour in the salt until the
container is filled with salt.