Electronic Adjustment; Use Of Dishwasher Salt - Zanussi ZDF3010 Benutzerinformation

1

Electronic adjustment

The water softener is set at the factory at level 5.
The appliance must be switched off.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of salt
that are not applicable for dishwashers cause
damage to the water softener.
1
3
Fill the salt container with
1 litre of water (only the
first operation).
2
Set switch to position 1 or
2.
2
4
1. Press and hold the start/cancel button. Turn the pro-
gramme knob counterclockwise until the programme
marker agrees with the first washing programme on
the control panel.
2. Release the start/cancel button when the digital dis-
play shows the current setting.
Examples:
– level 5 =
– level 10 =
3. Press the start/cancel button to change the water
softener level. Every time you press the button, the
level increases.
4. Turn the programme knob to the off position to save
the operation.
5
It is normal that water overflows from the salt con-
tainer when you fill it with salt.
Make sure that there is no grain of salt outer of the
salt compartment. Salt which stays on the tank for
a while drills the tank. It is recommended to start a wash-
ing programme immediately after you fill the salt con-
tainer. This prevents of corrosion because of spilled salt.
When you set electronically the water softener to level 1,
the salt indicator light does not stay on.
6
23