Product Description; Before First Use - Zanussi ZTH 475 Benutzerinformation

Read carefully the instructions supplied with
the kit.
• drain kit
Available from your Service Force Centre
or your specialist dealer
Installation kit for direct draining of conden-
sate into a basin, siphon, gully, etc. The con-
densate tank then no longer has to be
drained, it must however remain in its inten-
ded position in the machine.

Product description

Description of the appliance
1
2
3
4
5
Worktop
1
Water reservoir
2
Rating Plate
3
Heat exchanger
4
Heat exchanger door
5
Control panel
6
Fluff filters
7
Loading door
8
Ventilation grille
9

Before first use

Warning! If the appliance was not
transported in an upright position, leave it
to stand for 12 hours before connecting it to
the electricity supply and using it for the first
time, so that the oil can flow back to the
20
Read carefully the instructions supplied with
the kit.
• pedestal with the drawer
Available from your Service Force Centre
or your specialist dealer
To situate the dryer in optimal high and have
some additional space to store (e.g. laundry).
Read carefully the instructions supplied with
the kit.
Adjustable feet
10
Control Panel
6
7
8
1
9
Programme knob and
1
10
Intensief (Intensive) button
2
Lange anti-kreuk (Long anticrease) button
3
Zoemer (Buzzer) button
4
Function status led
5
– Drogen (Drying) light
– Anti-kreuk/Einde (Anticrease/End) light
– Condensor (Heat exchanger) light
– Filter light
– Waterreservoir (Water Reservoir) light
Start/Pauze (Start/Pause) button
6
Startuitstel (Delay) button
7
compressor. Otherwise the compressor could
be damaged.
In order to remove any residues which may
have been produced during production, wipe
the dryer drum with a damp cloth or carry out a
2 3 4 5 6 7
OFF switch
www.zanussi.com