Yamaha CBX-K1XG Bedienungsanleitung Seite 50

2.6 Mono
Status
1011nnnn Bn
01111110 7E
00000000 00
Performs the same function as when an All Sounds Off message is
received, and if the 3rd byte (mono number) is in the range of 0 – 16,
sets the corresponding channel to Mono Mode (Mode 4 : m = 1).
2.7 Poly
Status
1011nnnn Bn
01111111 7F
00000000 00
Performs the same function as when an All Sounds Off message is
received, and sets the corresponding channel to Poly Mode (Mode 3).
3. SYSTEM EXCLUSIVE MESSAGES
System Exclusive messages control various functions of the CBX-
K1XG, including master volume and master tuning, play mode, effect
type and various other parameters.
3.1 Parameter Change
The CBX-K1XG receives the following parameter change messages.
[ UNIVERSAL REALTIME MESSAGE ]
1) Master Volume
[ UNIVERSAL NON REALTIME MESSAGE ]
1) General MIDI Mode On
2) Identity Request (INQUIRY MESSAGE)
[ XG NATIVE PARAMETER CHANGE ]
1) XG System on
2) XG System Data parameter change
3) Multi Effect1 Data parameter change
4) Multi Part Data parameter change
5) Drums Setup Data parameter change
[ OTHER ]
1) Master Tuning
2) TG300 System Data Parameter change
3) TG300 Multi Effect Data parameter change
4) TG300 Multi Part Data parameter change
5) Disc Orchestra On
3.1.1 Universal Realtime Messages
3.1.1.1 Master Volume
Exclusive status
11110000 F0
Universal Real Time
01111111 7F
01111111 7F ID of target device
Sub-ID #1=Device Control Message
00000100 04
Sub-ID #2=Master Volume
00000001 01
Volume LSB
0sssssss ss
Volume MSB
0ttttttttt tt
End of Exclusive
11110111 F7
or,
11110000 F0 Exclusive status
Universal Real Time
01111111 7F
Device Number, xxx = irrelevant
0xxxnnnn xn
Sub-ID #1=Device Control Message
00000100 04
n=Channel number
n=Channel number
Sub-ID #2=Master Volume
00000001 01
Volume LSB
0sssssss ss
Volume MSB
0ttttttttt tt
End of Exclusive
11110111 F7
When received, the Volume MSB will be effective for the Sys-
tem Parameter MASTER VOLUME (page App-12).
3.1.2 Universal Non-Realtime Messages
3.1.2.1 General MIDI Mode On
Exclusive status
11110000 F0
Universal Non-Real Time
01111110 7E
ID of target device
01111111 7F
00001001 09 Sub-ID #1=General MIDI Message
00000001 01 Sub-ID #2=General MIDI On
End of Exclusive
11110111 F7
or,
Exclusive status
11110000 F0
Universal Non-Real Time
01111110 7E
0xxxnnnn xn Device Number, xxx = irrelevant
00001001 09 Sub-ID #1=General MIDI Message
Sub-ID #2=General MIDI On
00000001 01
End of Exclusive
11110111 F7
When General MIDI Mode On is received, the play mode will
be changed to XG mode.
When this happens, the CBX-K1XG will receive the MIDI mes-
sages which compatible with GM System Level 1, and conse-
quently will not receive NRPN and Bank Select messages.
When the C/M mode is active, these messages are ignored.
Since approximately 50ms is required to execute this message,
be sure to leave an appropriate interval before the subsequent
message.
3.1.2.2 Identity Request
11110000 F0 Exclusive status
Universal Non-Real Time
01111110 7E
Device Number, n= 0...15
0000nnnn nn
Sub-ID #1=General Information
00000110 06
Sub-ID #2=Identity Request
00000001 01
11110111 F7 End of Exclusive
The CBX-K1XG transmits an Identity Reply message (see 3.1.2.2
on page App-3) when this is received.
3.1.3 XG Native Parameter Change
With the Parameter Change messages as listed below, you can
change the characteristic of a Voice, such as by Effect Type or ef-
fect parameter, transpose, tuning, and others.
A connected XG-compatible tone generator can be controlled in
the same way (via the MIDI OUT or TO HOST terminals).
Exclusive status
11110000 F0
YAMAHA ID
01000011 43
Device Number
0001nnnn 1n
01001100 4C XG Model ID
0aaaaaaa aa Address High
Address Mid
0aaaaaaa aa
Address Low
0aaaaaaa aa
Data
0ddddddd dd
| |
11110111 F7 End of Exclusive
MIDI Data Format
App-9