Inhaltsverzeichnis
Werbung
P73164/F5U104/eng/AM/man.qxd
5. Setting up Network Support Manually
1.
Display the "Configuration" tab in the Network dialog
from the Control Panel (see directions in section 5.1).
2.
Click "Add".
3.
Double-click "Adapter".
4.
Click "Have Disk".
5.
Insert the USB Direct Connect installation disk.
6.
Make sure the edit box contains the name of your
floppy drive (typically a:) – a:\win95 or a:\win98.
7.
Click "OK".
8.
Click "OK" again in the last dialog box.
9.
After exiting the Network Configuration, Windows
also ask for the location of 'KLNETSET.EXT', just type the
path A:\win95 or a:\win98 then click "OK".
5.3.2 Installing Client for Microsoft
If Client for Microsoft
component list from section 5.1 (Determining Your Existing
Configuration), go on to the next section.
1.
Display the "Configuration tab" in the Network dialog
from the Control Panel (see directions in section 5.1).
2.
Click "Add".
3.
Double-click "Client".
4.
On the left side, in the "Manufacturers" box, click
"Microsoft
®
".
5.
On the right side, in the "Network Clients" box, click
"Client for Microsoft
6.
Click on "OK".
4/5/00
8:38 AM
(continued)
®
Networks
Networks is already in the installed
®
®
Networks".
18
Page 18
®
may
Werbung
Inhaltsverzeichnis
