Weather Forecast; Temperature And Humidity; Temperature And Humidity Trend; Wind Chill / Direction / Speed - Oregon Scientific WMR80 Bedienungsanleitung

2. Press and hold MODE to activate auto-scan. The
temperature and humidity display will scroll from
indoor to ch1 through to ch3.
3. Press any key to stop the auto-scan.
NOTE Channel 1 is used for the outdoor temperature
and humidity sensor. Additional temperature and humidity
sensors can use other channels.

WEATHER FORECAST

The weather display in the top part of the screen shows
the current weather and the weather forecast for the next
12-24 hours within a 30-50 km (19-31 mile) radius.
Weather Forecast Area
ICON DESCRIPTION
Sunny
Partly cloudy
Cloudy
Rainy
Snowy

TEMPERATURE AND HUMIDITY

The weather station displays indoor and outdoor
readings for:
1. Temperature / relative humidity (current / maximum
/ minimum)
2. Trend line
3. Wind chill (current / minimum) and dew point level
(current / maximum / minimum)
The weather station can connect up to
NOTE Channel 1 is dedicated for outdoor temperature
and humidity.
shows which remote sensor's data you are viewing.
appears when indoor data is displayed.
The timestamp records the date and time when storing the
temperature and humidity readings in memory.
To select the temperature measurement unit:
Press UNIT to select °C / °F.
NOTE The unit of all temperature related displays will be
changed simultaneously.
3 remote sensors.
7
To view temperature (Current / Min / Max temperature)
readings:
1. Press SELECT to navigate to the Temperature Area.
will show next to the Area.
2. Press + / - to select the channel.
3. Press MIN / MAX to toggle between current / MAX /
MIN displays.
To view humidity (Humidity, Dew point) readings:
1. Press SELECT to navigate to the Humidity Area.
will show next to the Area.
2. Press + / - to select the channel.
3. Press MODE repeatedly to toggle between the
humidity / dew point displays.
4. Press MIN / MAX to toggle between current / MAX /
MIN displays.
The timestamp is displayed accordingly in the Clock
Area.
To clear the memories and timestamp for the
temperature, humidity and dew point readings:
In the Temperature or Humidity Area, press and hold MIN
/ MAX to clear the readings.
NOTE The dew point advises at what temperature
condensation will form.

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the temperature and
humidity readings. The trend is shown as follows:
RISING STEADY

WIND CHILL / DIRECTION / SPEED

The base station
provides wind speed
and wind direction
information.
To read the wind
direction find the
compass point the
is pointing to.
The timestamp records the date and time when storing
the wind speed readings.
To select the wind speed unit:
Press UNIT to switch between:
• Metres per second (m / s)
• Kilometers per hour (kph)
• Miles per hour (mph)
• Knots (knots)
FALLING