General - Network - Conceptronic CH3ENAS Erweitertes Benutzerhandbuch

8.2.2 General – Network
View and setup the network configuration of the Home Media Store.
Device name
Group name
Link speed
Jumbo frames
IP configuration
IP address
Subnet mask
Gateway IP address
DNS 1
DNS 2
Note: You can only set a Static IP address if „IP configuration‟ is set to "Static IP".
Apply
: Change the device name of the Home Media Store.
: Change the workgroup name where the Home Media Store is located in.
: Shows the current link speed.
: Enable or disable Jumbo frames.
: Dynamic IP (DHCP) : The Home Media Store will obtain an IP address automatically
Static IP : Setup a static IP address for the Home Media Store.
: Set an IP address for your Home Media Store.
: Set a corresponding subnet for the IP address.
: Set a valid gateway IP address in your network.
: Set a valid DNS for your network.
: Set a valid secondary DNS for your network (optional).
: Apply the network settings.
from an existing DHCP server.
ENGLISH
73