ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
Radio Channel
00
Identifier
00
Test Mode
ON/Off
Reset Parameters
Hold +
Database 00
?
Hours counter
00 h
© ASTRALPOOL 2008. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
This screen sets the radio channel the unit will use to
communicate with the remote. In order to work properly,
remote has to be set to the same radio channel.
This screen is reserved to MODBUS
protocol.
This screen sets if test mode is enabled. Test mode is
reserved for technicians that need to diagnose the unit.
On this screen, by holding + key for 5 seconds will reset all
unit's parameters, reverting them to factory settings.
This screen shows a record that stores the unit's actions.
This screen shows the time period the unit has been
activated.
Figure 7: Technical Menu Description.
ENGLISH
®
communications
Page 30 of 229