Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
5.5
Mounting the product
MECHANICAL LOADS AND STRESS
•
Verify that the product is not subjected to mechanical loads and stress when
connecting the product.
•
If necessary, install a corrugated pipe compensator to compensate for
mechanical stress or tension.
Failure to follow these instructions can result in equipment damage.
5.5.1
Mounting the product to a boiler manifold KSV
1. Remove the upper insulation.
2. Screw the pump assembly to the boiler manifold KVS.
3. Screw the pipes of the heating circuit to the top connections of the prod-
4. Refit the upper insulation.
18
uct (no mechanical stress).
PrimoTherm®
Mounting
NOTICE
Werbung
Kapitel
Inhaltsverzeichnis
