Hardware Installation - Belkin 802.11g Installationsanleitung

Hardware Installation

Warnings:
(1) This network adapter requires a PC and BIOS that supports the PCI Local Bus
Specification v2.2 or later. If you are installing in an older computer model, upgrade the
BIOS to the latest version.
(2) Network cards are sensitive to static electricity. To protect the card, always touch
the metal chassis of your PC or the ground before handling the adapter.
Follow these steps to plug the adapter into your computer:
1. Switch off the computer, unplug the power cord, and remove the computer's cover.
2. Select an available bus-mastering PCI slot and remove the cover bracket.
3. Insert the Wireless PCI Adapter into the slot so that it is firmly seated. Screw the
card's bracket securely into the computer's chassis.
Note: Be careful that it does not touch any conducting parts on the computer
motherboard.
4. Replace the chassis cover on your computer and power it on.
5. Attach the antenna, see the next page for instructions.
4