Inhaltsverzeichnis
Werbung
EN
1.5 KG ROAST CHICKEN
ROAST CHICKEN LEGS
ROAST CHICK.BREASTS
ROAST CHICKEN WINGS
CHICKEN CROQUETTES
ROAST TURKEY LEGS
NEW
MORE
Fig. A
5.3 STORAGE OF A NEW AUTOMATIC COOKING PROGRAM
Fig. A. To store a new automatic cooking program, select among the 6 available groups of programs the one
where you want to add a new program.
Press the icon NEW here below on the left side.
Fig. B. Using the keyboard appearing on the display, digit the name for the new program.
Press OK to confirm.
Fig. C. The display now visualizes the name of the new program and the 6 phases it's possible to configure.
Phase 1 has a green background to indicate that the user is configuring it.
The other phases are at the moment on a grey background (unused).
To go on, select the mode which will control the first phase of the program (convection or steam).
Fig. D. After you have selected the mode, the display will propose the default values.
It's possible to modify these parameters as described in the previous paragraphs.
In the same way it's possible to select the core probe and eventually Delta T function to control the phase.
You can activate the available additional functions (autoreverse, reduced ventilation, open release valve).
If you have already configured at least 1 phase, the icon OK can be activated to store the new program.
After you have configured the parameters of the first phase, press "+" to add a new phase and proceed with a
new configuration.
After you have configured the foreseen phases for the new program, press the icon OK to store them.
The new program will be added at the end of the list for the stored programs.
NEW PROGRAM
Fig. B
14
NEW PROGRAM
Fig. C
NEW PROGRAM
Fig. D
Werbung
Inhaltsverzeichnis
