Ventilation System; Adjusting The Chin Strap; Harness Height Adjustment - Crivit IAN 297930 Bedienungsanleitung

Ventilation system

You can regulate the ventilation using the slider. There are three
possible settings: open, half open, and closed (4) (Fig. A).

Adjusting the chin strap

The length of the chinstrap can be adjusted using the loop. You can
alter the position of the chinstrap by using the strap divider clip.
However please ensure that the strap divider does not cause irritati-
on. We recommend positioning it at the end of the ear padding
(figure C).
Harness adjustment
Use the dial to adjust the helmet to your head size to ensure the hel-
met is seated optimally. Turn the wheel to the left to loosen the head-
band on the helmet and to the right to tighten the headband (Fig. D).

Harness height adjustment

The height of the harness system is adjustable. There are 3 different
height adjustments. Pull the connector pin on the harness system out
of the tab locations in the EPS shell (Fig. F).
The pins on the harness system can now be moved to a higher or
lower tab location. Firmly press the pins into the latching points until
you can hear and feel them lock in. Always be sure both pins lock in.
Position the padding as shown in figure F.
GB 13