Rollei Mark II Anleitung Seite 29

Functions
2. Group A / B / C: In the same channel up to 3 groups (A/B/C) can be
controlled independently . Within each group the number of flashes is not
limeted . By pressing the group button repeatedly you can select the group of
which you would like to change the mode or power value .
3. Shooting modes: There are two modes that can be used, M = manual
mode and TTL = automatic exposure mode . Changing shooting modes is
done by pressing the respective group selection button .
4. Flash modes: By pressing the sync button repeatedly you can switch
between the different sync modes:
Front curtain sync = The sync icon
Rear curtain sync = The icon for rear curtain sync
High speed sync =
is displayed .
on the display .
The icon for high speed sync
on the display .
of the first shutter curtain
is shown
is shown
29