Parts Identification; Preparation - Panasonic ER-GB44 Bedienungsanleitung

Parts identification
A
B








C

A
Main body
1 Water inlet
2 Trimming height
indicator
3 Dial (Height
adjustment control)
4 Power switch
5 Appliance socket
B Blade
6 Cleaning lever
7 Moving blade
8 Stationary blade
9 Mounting hook
C Comb attachment
for beard
(1 mm to 10 mm)
D
@

A

E F G
AC adaptor (RE9-91)
D
 Charge indicator
lamp
 Charging plug
 Cord
 Power plug
Accessories
Cleaning brush
E
F Oil
Pouch
G
ER-GB44

Preparation

Charging
• W ipe off any water droplets or dirt on the appliance
socket.
• Make sure that the main body is turned off.
1 Place the main body on the AC
adaptor.
• Plug the main body into the AC
adaptor until it clicks into place.
• Remove the main body with
one hand while pressing the AC
adaptor with the other hand.
• If you charge the appliance with
power switch turned on, it will
start working when you remove
from the AC adaptor.
2 Insert the power plug into a
household outlet.
• The charging time differs depending on the rated
voltage. (See page 20.)
• Check that the charge indicator lamp glows.
3 Disconnect the power plug after charging is
completed.
(for safety and to reduce energy usage)
• The charge indicator lamp continues to glow after
charging is complete. There is no indication to
show that "charging is complete".
2
1
11