Fitting Desk Screen (In 3Rd Level And Clamp Adapters) - König+Neurath TALO.S Bedienungs- Und Montageanleitung

Fitting desk screen
(a) Remove cover and snap off the central part.
(b) Attach cover and insert clamp adapter into desk adapter,
tighten grub screw (SW 3).
(c) Insert the screen and align it laterally. Tighten the screw
on rear of adapter (SW 4).
(d) Slide clamp adapter onto desk top and insert screen into
adapter. Tighten screw on rear of adapter and tighten
clamp bolt under desk top (SW4).
snap off
(a)
(c)
Safety instructions:
Ensure that the desk and its attachments
have a minimum clearance of 25 mm to other
objects in all movable desk positions. Desks
arranged in a block pose a particular risk of
crushing and shearing.
(b)
(d)
53