Water Connection; Pre Start-Up Checks - Gram PRIMA-BOX GM1 Bedienungsanleitung

Cable Glands Identification:
(A) For mains supply cable
(B) For door heater supply (BGM only), alarm cable and door microswitch (optional)
Optional:
(C) Cable gland for remote panel cable

WATER CONNECTION

This connection is necessary only if the unit has a water cooled condenser. It should follow
the tags positioned by the inlet and outlet pipes. Connection pipes should never be smaller
in diameter than those on the unit. Minimum water pressure of 1 Bar is required for correct
functioning of the machine.
PRE START UP CHECKS
Before turning unit ON please check the following:
- that the fixing screws are tight
- that the electrical connections have been correctly done
In the event that the unit has been opened:-
- that no tools were inadvertently left inside
- that installation has been properly carried out
- that there are no gas leaks
- that the front cover has been correctly repositioned
76-504-0914 17