Observe Ambient Temperature And Ventilation; Switching On The Appliance; Operating Tips; Selecting The Temperature - Gaggenau RF 2.7 Gebrauchsanleitung

Observe ambient temperature
and ventilation
The appliance is designed for a specific climatic class.
Irrespective of the climatic class, the appliance can be
operated at the following room temperatures.
The climatic class can be found on the rating plate at the
bottom left hand side in the appliance.
Climatic class
SN
N
ST
T
Ventilation
Conduction of the heated air must not be obstructed.
Otherwise, the refrigerating unit must work harder.
This increases power consumption.
Therefore: Never cover or block ventilation opening!
Room temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C

Switching on the appliance

Switch on the appliance with the main switch 5.
A warning signal sounds and Alarm button 1 and
the temperature display flash.
Press Alarm button 1 to switch off the warning signal.
The Alarm button is lit and the temperature displays flash
until the appliance has reached the set temperatures.

Operating tips

When the freezer compartment has reached its
D
operating temperature, the temperature display 3
is lit continuously.
The sides of the housing are sometimes heated
D
slightly. This prevents condensation in the area of the
door seal.
If you cannot open the freezer compartment door
D
immediately after closing it, wait 2 3 minutes until the
partial vacuum has equalised.
The fully automatic Nofrost system ensures that the
D
freezer compartment remains free of ice. Defrosting
is no longer required.

Selecting the temperature

Freezer compartment

(can be selected from -16 °C to -24 °C)
Keep pressing temperature selection button 3 until
the required freezer compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on display 4.
We recommend a setting of -18 °C in the freezer
compartment.
25