Measures When Drive Is Used In It Systems - Lenze L-force Drives 8400 motec Montageanleitung

6.3

Measures when drive is used in IT systems

If the drive is installed in an IT system, internal filters must be separated from
the PE conductor.
How to proceed:
1. With a controller already mounted: Switch off mains voltage!
2. Remove the small cap on the top.
3. Unscrew and remove the screw.
4. Screw in cap.
IT system
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 3.1
Setting with the diagnosis terminal (keypad)
Measures when drive is used in IT systems
l
Settings 6
E84DG046
47