13 4.4 Assembly Mount; Maintenance; 13 5.3 Spare And Wearing Parts - Bosch KTS 5 Serie Originalbetriebsanleitung

en 18 | KTS 525 (KTS 5 Series) |
4.4 Assembly mount
The mount included with the delivery allows fastening
and loosening the KTS modules on the Bosch trolley.
1. Screw in the three fillister head screws on the Bosch
trolley (see fig. 4).
Fig. 4: Assembly mount
2. Using the sheet-metal screws included with the
delivery, screw the mount onto the KTS module
(holes for mounting are on the rear of the module).
3. Correct the screw penetration of the fillister head
screws on the vehicle so that the KTS modules are
solidly and securely seated in position following
installation.
|
1 689 989 171 2019-01-04
5.

Maintenance

5.1 Cleaning
The housing of KTS 525 (KTS 5 Series) are only to be
cleaned using a soft cloth and a neutral cleaning agent.
Do not use any abrasive cleaning agent or rough cleaning
cloths.
5.2 Maintenance
The tab Customer service can be used for performing
various tests in DDC. A portion of these tests can only
be performed by customer service.
5.3 Spare and wearing parts
i
Replacement and wear parts only concern parts
received in the respective delivery.
Description
System tester KTS 525 (green)
System tester KTS 525 (anthracite)
System tester KTS 525 (Club Assist; anthracite) 1 687 023 682
Adapter insert
OBD diagnosis cable 1.5 m
<)
Power pack
Connection cable USB 3 m
<)
UNI connection cable 4 core
<)
Case
Mount parts set
Bluetooth USB adapter
Part subject to wear
<)
Order Number
1 687 023 670
1 687 023 671
1 688 000 349
1 684 465 555
1 687 023 693
1 684 465 562
1 684 463 539
1 685 438 648
1 687 001 853
1 687 023 777
Robert Bosch GmbH